An air purifier ideal for allergy & asthma sufferers in the bedroom and small offices with the added 2.5kg activated carbon filter for high capacity chemical and VOC removal.

825.00 AUD
Add to Cart


  • Certified medical-grade HEPA filtration 99.97% @ 0.3 microns.
  • High airflow quickly reduces ambient dust, allergens and chemical pollutants.
  • Plastic-free, chemical-free all steel powder coated construction.
  • High efficiency Pre-filter
  • Final stage 2.5kg activated carbon filter.
  • Same medical-grade HEPA filtration normally only found in larger, more expensive air purifiers.
  • HEPA filter life up to 5 years for low running cost. *


  • Effective in areas up to 25m2, suitable for bedrooms or small offices.
  • Highly effective in removing dust, allergens.
  • Portability, easily moved from room to room on wheels.

    The filter in the InovaAir E8 system is manufactured using H13 medical-grade HEPA filtration with an incredible 3.8m2 surface area, combined with Technostat® pre-filtration microporous filter technology these filters exceed HEPA filtration standards. Normally only found in commercial environments such as hospitals and cleanrooms. These E8 filters provide the highest level of filtration available.


    Large filters not only result in superior filtration and airflow, they also result in:

  • lower energy consumption
  • longer filter life
  • less environmental impact
  • Lower cost of ownership
  • Certified 99.97% minimum efficiency at 0.3 microns (tested down to 0.003 microns @ 100% efficiency)* 
    * Tested by LMS Technologies Inc, 2017 (EN1822)

    **Based on 60% daily usage over 5 years, or continuous usage over 3 years in environments with average particulate/chemical levels. As operating conditions vary based on levels of dust, chemicals & odours present, and system proximity to major pollution sources, InovaAir does not warranty consumable filter life

    Technical Specifications


    AirClean E8 Portable Air Purifier


    Air Delivery/Airflow

    Air delivery 70-300m3/hour (41-177cfm)


    Recommended coverage area 25m2 (269ft2)


    Motor Type

    Centrifugal fan (European), designed for continuous 24 hour operation (ball bearing maintenance free)

    Speed Control

    4 speed dial

    Power Consumption

    1 - 10W, 2 - 17W, 3 - 35W, 4 - 60W

    Power Supply

    230V, 50Hz (AUS)

    Operating Temperature

    Min 0o C, Max 40o C (32o F - 104o F)

    System Enclosure


    Australian made, Dulux® powder coated zinc steel 20 guage


    32 x 32 x 49cm (12.6 x 12.6 x 19.3”)

    Weight (Inc. Filters)

    14.5kgs (32lbs)

    Filter Specifications

    Filter 1: Pre-filter x 1

    Technostat® electrostatically charged high efficiency pre-filter

    Stage 2: H13 HEPA Filter x 1

    H13 Medical-grade HEPA Filter, certified 99.97% minimum efficiency at 0.3 microns (tested down to 0.003 microns @ 100% efficiency)


    HEPA filter surface area 3.8m2 (41ft2), 100% airtight gasket seals, all steel housing.

    Stage 3: Activated Carbon Filter x 1

    2.5kg (5.5lbs) coconut shell activated carbon (steel casing)

    Filter Change Intervals**

    Stage 1: Pre-filter

    3-6 months of continuous use*

    Stage 2: H13 HEPA Filter

    3- 5 years continuous use*

    Stage 3: Activated Carbon Filter

    3- 5 years continuous use*


    5 years (parts & labour), 10 years on system housing

    AirClean E8 Filters


    The E8 three-stage filter provides the highest level of filtration and airflow available resulting in lower energy consumption, longer filter life and lower cost of ownership.


    All 3 filters are included with the initial system purchase.

    What do our Air Purifiers remove from the air?

    STAGE 1 | Technostat® high-efficiency pre-filter
    Designed to remove ambient fine dust particles from the air and increase the lifespan of the HEPA and Activated Carbon filters.

    Technostat® is used in many medical applications which demand some of the highest levels of filtration since they are often used in life-support and human ventilation machines.*

    BFE Efficiency > 99.9992% VFE Efficiency > 99.9970%


    Filter life: 1 - 3 years continuous use**

    *Tested in accordance to Spec MIL-M-36954C By Nelson Labs

    Filter life: Up to 6 months continuous use**

    STAGE 2 | H13 Medical-grade HEPA filter
    The HEPA filter removes viruses, bacteria, mould spores, allergens, pollen and dust mites before passing the air on to the third stage filter. The E8 filter has a 3.8m² surface area and is certified to filter to 99.97% @ 0.3 microns -tested down to 0.003 microns at 100% efficiency*.

    Filter life: 3 - 5 years continuous use**

    STAGE 3 | Coconut based Activated Carbon final stage filter
    A 2.4kg activated carbon final stage filter, designed to remove chemical pollutants, volatile organic compounds (VOC’s), smoke, road pollution and odours before the purified air is released back into the room through the High-Flow air diffuser.

    Filter Life: 1- 3 years continual use **